School T-frame chair on a round tube, sizes 4-7, HPL coated

School T-frame chair on a round tube, sizes 4-7, HPL coated is a student chair for middle and senior grades with a wear-resistant plastic coating on the seat and backrest. HPL 0.4–0.5 mm thick makes the surface resistant to scratches, moisture and intensive daily use, so the chair keeps a tidy look longer than lacquered models — a meaningful advantage for high-traffic classrooms.

The seat and backrest are made of bent-glued plywood 8–9 mm thick and coated with HPL plastic; the corners of the seat and backrest and the front seat edge are rounded. The frame is welded from round tubes 32×1.2 and 25×1.2 mm and a flat-oval tube 30×15 mm with a powder coating. Height is set with screws through holes in the frame and leg with a plastic transition sleeve; the frame carries size-group markings that simplify setup. Plastic caps on the tube ends protect the floor.

The model suits classroom fit-outs.

• Overall dimensions: 421×495×781–901 mm
• Size groups: 4–7, with markings on the frame
• Weight: 5.45 kg
• Seat and backrest: bent-glued plywood 8–9 mm with HPL coating 0.4–0.5 mm
• Frame: round tubes 32×1.2 and 25×1.2 mm, flat-oval 30×15 mm, powder-coated enamel
• Colors: frame — yellow (RAL1018), lime (RAL6018), grey (RAL7035), graphite (RAL7024); HPL — beech, milk oak, grey, artisan pearl beech

Why is HPL better than lacquer? HPL plastic is more resistant to scratches, wet cleaning and abrasion, so the seat keeps its look longer and is easier to clean.

How does a facilities manager quickly set the right height? The frame carries size-group markings, so the setting is checked visually without tools while adjusting the screws.

Which colors are available? Frame — four RAL colors, HPL — four decors (beech, milk oak, grey, artisan pearl beech), allowing a single scheme for a classroom or school.