Student set single with platform and tabletop tilt angle adjustment and shelf № 3-5 + T-shaped chair on strip oval tube № 2-5 with HP coating (32454 + 32452HPL)

1-seater student table set with a shelf, tabletop tilt angle adjustment, for height groups № 3-5 + T-shaped chair height-adjustable № 2-5 with HPL coating
Dimensions of the table: 700х590х580-700 mm. Weight: 13,50 kg. 
Overall dimensions of the table:
● width – 700 мм;
● depth – 590 мм;
● height – 580, 640, 700
● аngles of inclination of the table top - 0°, 3°, 5°, 7°, 9°, 12°, 14°, 16°.
The table consists of the table top of ergonomic form and metal frame. All corners of the table top are rounded. The table top consists of two parts. The part of the table top, which is situated from the side of the sitting, is fixed at an angle. Another part of table top is constantly set in horizontal position. 
Adjustment of the angle of inclination of the tabletop is implemented through the kind of mechanism similar to rostomat with the step of adjustment up to 3°, with obligatory presence of limiters for safety usage by pupils. At the lower part of the frame there is a hole in the form of a circle, through which a marking of height groups can be seen while adjusting the height of the table. Color marking in accordance with the height groups is applied in the form of a circle not less than 10х15 mm. on the right rack of metal frame from the side of the pupil. 
On both sides there are fixed the hooks for school bags. The frame of the table can be disassembled and is made of steel flat-oval tube 50х30 mm., 38х20 mm., 30х15 mm. and jumper d25 mm. The thickness of the tubes of the frame is 1,2 mm. On the horizontal part of the table top from the right side of working place there is a hole for a cup with office supplies, in the central part - a book holder and a pencil box.
Adjustment is imlemented through end-to-end nut-screw stitching with fixation of cover nut inside the tube for impossibility of unscrew in the course of shattering. Wooden elements depending on color combinations are made of chipboard of 16 mm. and 18 mm. thickness and are finished with PVC edge tape of 1 mm. thickness (table top, platform) and of 0.5 mm. - the screen and the shelf. The frame has protective decorative coating - powder enamel.
The holes are protected with plastic sleeves, which protect of entering of mud and moisture. The product is completed with anchorages of screws of semicircular injury-free form.
In color combination Yellow/Lime - TABLE TOP and SHELF are of 18 mm thickness of Lime color, SCREEN is of 16 mm thickness of Yellow color.
In color combination Sakura/Lavender - TABLE TOP and SHELF are of 18 mm thickness of Lavender color, SCREEN is of 16 mm thickness of Sakura color.
In color combination Beech - TABLE TOP is of 18 mm thickness, SHELF and SCREEN of 16 mm thickness.
In color combination Milky oak - TABLE TOP, SHELF and SCREEN are of 18 mm thickness.
In color combination Jasmine - TABLE TOP, SHELF and SCREEN are of 18 mm thickness.
Frame color: green (RAL6018), grey (RAL7035), yellow (RAL1018).
Chipboard color: beech, yellow/lime, sakura/lavender, jasmine, milky oak.

Dimensions of the chair: 331х417х618-738 mm. Weight: 4,57 kg.
Seat back size: 320х160 mm. Seat size: 320х330 mm.
The chair can be adjusted in height:
300 mm. (№2) – for pupils with height from 1150 mm. up to 1300 mm;
340 mm. (№3) – for pupils with height from 1300 mm. up to 1450 mm;
380 mm. (№4) – for pupils with height from 1450 mm. up to 1600 mm;
420 mm. (№5) – for pupils with height from 1600 mm. up to 1750 mm.
The chair consists of overlaid seat, seatback and metal frame. 
width - 331 mm;
depth - 417 mm;
height – 618, 658, 698, 738 mm;
height up to the upper base of the seat - 300, 340, 380, 420 mm;
seat - 320х330 mm;
seat back - 320х160 mm.
The seat and the seat back are made of sloping-glued plywood of 8-9 mm. thickness and are covered with HPL plastic of 0.4-0.5 mm thickness. The edges of the seat and the seat back and the front side of the seat have a radius of rounding to prevent injury.
The frame of the chair is made of flat-oval tube 30х15х1,2 мм., 38х20х1,2 мм. та 50х30х1,2 with applying of powder paint. The seat back and the seat are fixed to the frame with the help of screws. 
Adjustment is imlemented through end-to-end nut-screw stitching with fixation of cover nut inside the tube for impossibility of unscrew in the course of shattering. At the lower part of the frame there is a hole in the form of a circle, through which a marking of height groups can be seen while adjusting the height on the right rack from the side of the pupil.
Plastic tips are fixed on the end faces of the frame which prevent injury to the pupils and damage to the floor.
Frame color: green (RAL6018), grey (RAL7035), yellow (RAL1018).
HPL color: jasmine, beech, milky oak, blue.
Possible combinations of frame and HPL:
- yellow frame - HPL beech, milky oak, jasmine, blue;
- grey frame - HPL beech, milky oak;
- green frame - HPL beech, milky oak.
Book stand and a glass can be bought additionally.